How to make a boring mirror shine - giving your room a new look in less than 2 hours!
Step 1:
Begin by measuring your mirrors and making your cuts to your moulding. Sand the cut edges.
Step 2:
Apply adhesive to the back of the moulding.
Step 3:
Attached the moulding directly onto the mirror making sure everything is aligned.
Step 4:
Use painters tape to hold the moulding in place while it dries. After the moulding is dry carefully remove the tape.
Step 5:
Apply caulk to the corners and wipe away any access. This will full in any caps and give your moulding a seamless look.
.jpg?width=431&height=242 "Watch the Stanford Video")
.jpg?width=250&height=182 "1. The Countryside Lifestyle")
