Top Paints Skim Plaster

Use Top Paints Skim Plaster on the exterior and interior surfaces to fill and skim surfaces to perfection.

Main Attributes

• Adheres well to plaster as well as painted masonry surfaces

• Alkali resistant

• Gives a smooth finish to rough or uneven plaster surfaces

• No need to prime before painting

Surface Preparation

• Ensure that the surface is clean, dry, and sound before applying

Application

• Allow drying at least 2 hours before sanding, with fine-grit sandpaper, to a smooth, even surface

• Application: Wet plastering trowel, steel trowel, large scraper or skimming tool

• Thinning: Not required

• Cleaning: Water

• Coats: Apply only as much as needed

General Data

• Surface Dry: 2 - 3 Hours at 23°C

• Hard Dry: 4 Hours at 23°C

• Recoating Time: ± 6 Hours for water-based paints

• ± 16 Hours for enamel paints

• Spreading Rate: Not applicable

• Packaging: 1.7 kg, 8.5 kg and 34 kg

• Storage: Away from direct sunlight, heat, and severe cold

• Keep the container sealed and avoid moisture contact

Technical Data

• Viscosity: n/a

• S.G.: 1.68 ± 0.01

• Flash Point: Not determined

Skim Plaster

1L (1.7 Kg) - R70.00

5L (8.5 Kg) - R245.00

20L (34 Kg) - R870.00

The above prices are valid while stocks last and include VAT.