Top Paints Skim Plaster
Use Top Paints Skim Plaster on the exterior and interior surfaces to fill and skim surfaces to perfection.
Main Attributes
• Adheres well to plaster as well as painted masonry surfaces
• Alkali resistant
• Gives a smooth finish to rough or uneven plaster surfaces
• No need to prime before painting
Surface Preparation
• Ensure that the surface is clean, dry, and sound before applying
Application
• Allow drying at least 2 hours before sanding, with fine-grit sandpaper, to a smooth, even surface
• Application: Wet plastering trowel, steel trowel, large scraper or skimming tool
• Thinning: Not required
• Cleaning: Water
• Coats: Apply only as much as needed
General Data
• Surface Dry: 2 - 3 Hours at 23°C
• Hard Dry: 4 Hours at 23°C
• Recoating Time: ± 6 Hours for water-based paints
• ± 16 Hours for enamel paints
• Spreading Rate: Not applicable
• Packaging: 1.7 kg, 8.5 kg and 34 kg
• Storage: Away from direct sunlight, heat, and severe cold
• Keep the container sealed and avoid moisture contact
Technical Data
• Viscosity: n/a
• S.G.: 1.68 ± 0.01
• Flash Point: Not determined
Skim Plaster
1L (1.7 Kg) - R70.00
5L (8.5 Kg) - R245.00
20L (34 Kg) - R870.00
The above prices are valid while stocks last and include VAT.
